Bastl Instruments ABC full diy kit

Description

Bastl Instruments ABC

ABC is a simple 6 channel signal mixer. It has 6 inputs – A,B,C,D,E and F – and two outputs – A+B+C – which is mixed in to the D+E+F output if nothing is inserted in the A+B+C jack. ABC is designed to mix audio signals, but can be modified to mix CV signals instead. There are 6 solder jumpers on the back side, which can be connected to turn the abc mix into a CV mixer.

There are also 3 jumpers on the back side which can be used to normalize inputs A to D, B to E and C to F. This is useful if you would like to use the abc mix as a 3 channel stereo mixer (using both outputs and having separate volume control for left and right channel).

Features:

• 6 channel mixer
• 6 inputs A,B,C,D,E,F
• 2 outputs A+B+C and D+E+F (A+B+C is mixed into D+E+F if no jack is inserted in A+B+C)
• 3 jumpers to select normalization of inputs A to D, B to E, C to F (useful for stereo mixing)
• inputs are AC coupled
• there are solder jumpers for changing the inputs to DC coupling (than it can be used for mixing CV signals)
• front panel from oak wood
• handmade in Brno, Czech republic

Specs:

• 5 HP / 35 mm depth (skiff friendly)
• PTC fuse and diode protected 10 pin power connector
• current: +12 <10mA, -12 <10mA

Downloads:

• Complete assembly guide – PDF v1.1, PDF v1.0
• Short printable version – PDF v1.0
• Bill of Materials – Googledocs
• Schematics – PDF v1.1
• Board diagram – PDF v1.1
• User manual – PDF